Juha’s simulator rig build is progressing amazingly fast. Can’t wait to hop in and take it for a spin! To me it looks like a smart way to put a rigid simulator together with small amount of parts.
Simulator rig progress
1
Author Archives: Tero
Simulator rig
We asked couple of friends to help assembling the SimuCUBEs of the Indiegogo campaign, and as reward from their help I gave them SimuCUBEs. Well, this is what happens when you give them to brilliant people:
Simulator rig frame where the seat, steering wheel, pedals and SimuCUBE will be installed
Cutting simulator rig plywood parts with CNC router
This is a project of Juha which has been inspired by the earlier build of another help contributor, Mika. More updates will follow!
SimuCUBEs are becoming real
Boxes after boxes started piling up during the last week, and we had no choice but start occupying a new room for them. We expect rest of the parts, including some 4000+ screws to arrive within a week. After that, we start to figure out how to put it all together!
Piles of SimuCUBE parts
SimuCUBE final hardware has just born
Today we received the first samples of final SimuCUBE board designs. Testing of it shows no flaws so we’re giving the green light for the first 250 pcs batch assembly! All parts are already in stock, so assembly should not take too many days.
SimuCUBE with the needle bed SimuCUBE production tester device
The photo above shows also the work-in-progress test bed for SimuCUBE that will be used to test & verify the operation of every shipped SimuCUBE. The device under test will be placed on the top of the bed and the spring loaded pins will contact certain pads on the bottom of the SimuCUBE board to allow tester to contact all necessary signals at once.
Argon firmware 2.0 is out!
After long beta phase of Argon 2.0 firmware with lots of received feedback and experience, we finally made 2.0 to official production version. Seems like “2.0 beta 5″ was mature enough to be turned as offical 2.0
To see full list of changes compared to 1.x series and downloads, see Argon fifmware releases at Wiki.
SimuCUBE campaign ending soon
The last day of SimuCUBE Indiegogo campaign is starting! See also the updates on the Indiegogo page for latest news in development.
Last chances to contribute are going on
Campaign at: https://igg.me/at/simucube
SimuCUBE Indiegogo campaign now open!
As the title says, SimuCUBE campaign is now launched! Go grab yours before they’re all gone! Link.
The first SimuCUBE is real!
Prototypes of SimuCUBE motherboards and acrylic case have just arrived! The first successful test drive has been done with a big smile :) We hope to have Indiegogo campaign launched on the next week. Get ready for early bird specials!
SimuCUBE front
SimuCUBE rear
SimuCUBE motherboard with IONI Pro HC and 320 power supply
Construction of the acrylic case
Aside with 30 Nm peak MiGE motor
Ingenious SimuCUBE hardware & enclosure design and photos by Aki.
Acrylic cases for SimuCUBE system
We’re working on to make a reference design of acrylic enclosure for a SimuCUBE system. The box will fit all necessary force feedback system electronics, including a 320 W power supply. In our tests 320 W was fully sufficient for a 20 Nm wheel and well usable also with higher torque systems with power draw limit of IONI.
Work in progress acrylic case for SimuCUBE system. Design by Aki Korhonen.
Connector side. Design by Aki Korhonen.
The plan is to eventually offer a kit of all components, SimuCUBE + IONI Pro HC + PSU + case parts. Stay tuned!
SimuCUBE – the force feedback controller from the future announced
I’m happy to reveal the details of the upcoming force feedback controller – SimuCUBE! The hardware design is now complete for prototyping and we will get prototypes in the lab in the next month. SimuCUBE has a STM32F4 microcontroller that is compatible to a popular STM32F4 Discovery board. The plan is to start an open source firmware project for this board.
SimuCUBE will change the way simulators are built. Click to enlarge.
Brilliant hardware design & image render by Aki.