The awaited IONICUBE 1X has been now released and available through the web shop! Also documentation is online in the Wiki.
IONICUBE 1X
On-board features include:
- Carry single IONI drive
- On-board regenerative braking resistor drive (need just an external resistor)
- Support mechanical end-of-travel switches and homing switch
- Motor holding brake output with driver
- 20 pin ribbon cable connector for I/O and setpoint signals
- Support 3.3V, 5V and 24V1 I/O signal levels
- Charge pump enable input for safety
- E-stop switch input (safe torque off)
- ARGON Servo Drive and IONICUBE (4 axis) compatible encoder connector pin-out
- RJ45 connectors for SimpleMotion V2 usage and configuration
- On-board 0.5A 5V regulator to power drive logic and feedback devices
- DIN rail mounting option
I have received my Indigo pledge, the IONICUBE 4x with IONI Pro boards. I tested them and they work great!
I will start to design in the IONI motor drivers on my own 1x PCB starting next week. Because I am lazy and always short on time, I would like to ask, if the schematic and BOM for the IONICUBE 1x could be released in public. This way, everyone would have a reference for quick design in.
Regards
Kevin