IONICUBE 1X motherboard prototype

The prototype boards of IONICUBE 1X has arrived! On-board features include:

  • Carry single IONI drive
  • On-board regenerative braking resistor drive (need just an external resistor)
  • Support mechanical end-of-travel switches and homing switch
  • Motor holding brake output with driver
  • 20 pin ribbon cable connector for I/O and setpoint signals
  • Support 3.3V, 5V and 24V1 I/O signal levels
  • Charge-pump enable input for safety
  • E-stop switch input (safe torque off)
  • ARGON Servo Drive compatible encoder connector pin-out
  • RJ45 connectors for SimpleMotion V2 usage and configuration
  • On-board 0.5A 5V regulator to power drive logic and feedback devices
  • DIN rail mounting option
IONICUBE 1X prototype (not yet assembled)

IONICUBE 1X prototype (not yet assembled)

2 thoughts on “IONICUBE 1X motherboard prototype

  1. Good news. One customer already flew away, because of it’s lack. Estimated price range?

    Greets
    Lyubomir

Leave a Reply to lubchi Cancel reply

Your email address will not be published. Required fields are marked *

* Copy This Password *

* Type Or Paste Password Here *

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>