Servo drive developer » Simulators

SimuCUBE is getting exciting changes

Tero — Thu, 16 Aug 2018 13:14:20 +0000

During past two years we haven’t been resting on our sleeves on the development of the most ultimate force feedback controller, SimuCUBE.

Something extremely cool is about to be released in regard of SimuCUBE in this autumn. Stay tuned on our web/facebook/twitter pages to be the first to know!

The post SimuCUBE is getting exciting changes appeared first on Servo drive developer.

Simulator wireless magnetic paddle shifters and buttons

Tero — Fri, 05 Aug 2016 13:27:13 +0000

It’s time to make another post about amazing work of Juha. Now he has completed his design of magnetic paddle shifters as well as wireless transceiver. A group of us did test drive of the wheel and everyone immediately fell in love with the snappy feeling of magnetic shifters.

The magnetic switch has a micro switch and a small permanent magnet to produce the “spring” force of the paddle.

Magnetic paddle shifter

Paddles and buttons on a frame with wireless Bluetoot transceiver and battery

Button frame front side

Simulator wheel with controls installed

See it in action:

Maybe best of all, it’s open design. 3D printable parts and other info can be found from this Thingiverse page.

The post Simulator wireless magnetic paddle shifters and buttons appeared first on Servo drive developer.

SimuCUBErs are hitting the road

Tero — Mon, 18 Jul 2016 10:50:47 +0000

Eye candy paintwork made by proficient SimuCUBE drivers. Say Hi to them when you seem them on the road :)

Team Rusty Spatulas’ official paint work

Rusty’s artwork by Mika Takala.

Team SimRacigBay’s ride

Above artwork by Tomo Meglic. See the car in action (Youtube, iRacing official videos).

The post SimuCUBErs are hitting the road appeared first on Servo drive developer.

Simulator rig progress

Tero — Tue, 12 Jul 2016 11:02:34 +0000

Juha’s simulator rig build is progressing amazingly fast. Can’t wait to hop in and take it for a spin! To me it looks like a smart way to put a rigid simulator together with small amount of parts.

The post Simulator rig progress appeared first on Servo drive developer.

Simulator rig

Tero — Sat, 02 Jul 2016 12:17:43 +0000

We asked couple of friends to help assembling the SimuCUBEs of the Indiegogo campaign, and as reward from their help I gave them SimuCUBEs. Well, this is what happens when you give them to brilliant people:

Simulator rig frame where the seat, steering wheel, pedals and SimuCUBE will be installed

Cutting simulator rig plywood parts with CNC router

This is a project of Juha which has been inspired by the earlier build of another help contributor, Mika. More updates will follow!

The post Simulator rig appeared first on Servo drive developer.

SimuCUBEs are becoming real

Tero — Sun, 15 May 2016 17:12:10 +0000

Boxes after boxes started piling up during the last week, and we had no choice but start occupying a new room for them. We expect rest of the parts, including some 4000+ screws to arrive within a week. After that, we start to figure out how to put it all together!

Piles of SimuCUBE parts

The post SimuCUBEs are becoming real appeared first on Servo drive developer.

SimuCUBE final hardware has just born

Tero — Mon, 02 May 2016 16:35:57 +0000

Today we received the first samples of final SimuCUBE board designs. Testing of it shows no flaws so we’re giving the green light for the first 250 pcs batch assembly! All parts are already in stock, so assembly should not take too many days.

SimuCUBE with the needle bed SimuCUBE production tester device

The photo above shows also the work-in-progress test bed for SimuCUBE that will be used to test & verify the operation of every shipped SimuCUBE. The device under test will be placed on the top of the bed and the spring loaded pins will contact certain pads on the bottom of the SimuCUBE board to allow tester to contact all necessary signals at once.

The post SimuCUBE final hardware has just born appeared first on Servo drive developer.

SimuCUBE status update

Aki Korhonen — Mon, 25 Apr 2016 08:02:58 +0000

Just a quick update on how things are going with SimuCUBE; we are waiting for the first set of final SimuCUBE PCBs to arrive within a week to verify that everything is ok. Also the first prototype of the acrylic case for NDR-480 and SDR-480 power supplies is cut and assembled, after a couple of adjustments everything seems to work fine and the cases are going in to production next.

The post SimuCUBE status update appeared first on Servo drive developer.

SimuCUBE campaign ending soon

Tero — Mon, 04 Apr 2016 18:10:41 +0000

The last day of SimuCUBE Indiegogo campaign is starting! See also the updates on the Indiegogo page for latest news in development.

Last chances to contribute are going on

Campaign at: https://igg.me/at/simucube

The post SimuCUBE campaign ending soon appeared first on Servo drive developer.

SimuCUBE Indiegogo campaign now open!

Tero — Wed, 16 Mar 2016 15:35:59 +0000

As the title says, SimuCUBE campaign is now launched! Go grab yours before they’re all gone! Link.

The post SimuCUBE Indiegogo campaign now open! appeared first on Servo drive developer.