Comments on: The first shipments http://openservodrive.com/the-first-shipments/ Cutting edge without Bleeding edge Thu, 15 May 2025 12:21:32 +0000 hourly 1 http://wordpress.org/?v=4.1.12 By: Tero http://openservodrive.com/the-first-shipments/#comment-310 Thu, 08 Aug 2013 21:08:44 +0000 http://openservodrive.com/?p=785#comment-310 Just made a new article:
http://granitedevices.com/wiki/Argon_user_guide/Wiring/Feedback_device_examples

It’s true that there’s no pass-through connector for feedback in Argon. Instead pass them through external controller to the drive or split the cable (perhaps D15 spitters are available?).

]]> By: PowerQuestion http://openservodrive.com/the-first-shipments/#comment-309 Thu, 08 Aug 2013 20:59:42 +0000 http://openservodrive.com/?p=785#comment-309 Not really, as there is no information about what pins related to the encoder will be used as “pass though” to the controller (in the VSD it was the EXT connector). Maybe this drive does not have it and the user wires the encoder for both drive and controller?
I will have to wait for the examples then.

]]> By: Tero http://openservodrive.com/the-first-shipments/#comment-308 Thu, 08 Aug 2013 20:00:21 +0000 http://openservodrive.com/?p=785#comment-308 Is this sufficient to begin?
http://granitedevices.com/wiki/Argon_user_guide/Wiring

There will be some wiring examples soon.

]]> By: Tero http://openservodrive.com/the-first-shipments/#comment-307 Thu, 08 Aug 2013 19:51:46 +0000 http://openservodrive.com/?p=785#comment-307 Actually its not a mistake. I bought several D-sub hoods to find out which would be suitable to be insterted in the package. The cheapest ones are very bad and the cheapest decent looking costs nearly 2 eur/pcs in a large volume so I decided to leave it out. The original purpose to include a minimalistic connectors set was merely to elimiate the wait before drive can be made operational. So one may use the bare D-sub as temporary solution and add a hood of his preference later.

However, if the majority prefers the 2 eur hood to come with package, then we’ll add them :)

]]> By: PowerQuestion http://openservodrive.com/the-first-shipments/#comment-306 Thu, 08 Aug 2013 09:15:04 +0000 http://openservodrive.com/?p=785#comment-306 Just a remark: The J1 connector was received, but not its cover… does not make too much sense as the cover is probably 0.10€. Searching for it will now be much more time consuming than receiving it in the first place.

]]> By: PowerQuestion http://openservodrive.com/the-first-shipments/#comment-305 Thu, 08 Aug 2013 09:01:26 +0000 http://openservodrive.com/?p=785#comment-305 I already received the drives! Very fast.
They look ok and now I am already installing them.

As I am passing and ordering cables, so that I get all working as fast as possible, I really need to know there the cable from the drive with the encoder information to the controller go from (in what connector). In my case I will use the drive in velocity mode and the loop will be closed in the controller.

Thank you

]]> By: Johann http://openservodrive.com/the-first-shipments/#comment-301 Tue, 06 Aug 2013 18:56:19 +0000 http://openservodrive.com/?p=785#comment-301 thanks Tero

]]> By: Tero http://openservodrive.com/the-first-shipments/#comment-300 Tue, 06 Aug 2013 18:16:35 +0000 http://openservodrive.com/?p=785#comment-300 Indeed! Feel free to browse the documentation which will be finalized on next days: http://granitedevices.com/argondocs/
There are prelimiary wiring diagrams already.

]]> By: Tero http://openservodrive.com/the-first-shipments/#comment-299 Tue, 06 Aug 2013 18:15:08 +0000 http://openservodrive.com/?p=785#comment-299 Yes! I sent you email regarding this earlier today.

]]> By: Johann http://openservodrive.com/the-first-shipments/#comment-298 Tue, 06 Aug 2013 17:07:01 +0000 http://openservodrive.com/?p=785#comment-298 and one is mine too :-D

tero did you get my message on the “contact us” page sales site about my order,
command name KOLARIK Matus ?

]]>