Comments on: New poll

By: Jason

Jason — Thu, 20 Jun 2013 08:00:23 +0000

In the case of the IDC connector I’d leave them out. Inevitably, everyone will want different cable lengths. Some may want to split the cable to some combination of DB9/DB16/DB26 to IDC connector, others might go to a custom PCB. IDC connectors + ribbon cable are very easy to assemble.

Regarding the 15 pin D-sub, I’d like to see that included. I can’t speak for others, but for myself and 99% of my customers it will be required.

I usually ask customers if they need connectors, and supply them as required so that should reduce the possibility of having the drive arrive but being unable to install for lack of connectors.

Regards,

Jason

By: Tero

Tero — Tue, 18 Jun 2013 21:26:27 +0000

You got the point! That’s what we’re trying to eliminate: avoid forgotten parts in order to reduce installation time. I’m now thinking that we could make an “install kit” product that includes all the connectors and their accessories, just like we have one for VSD-E.

If all parts come with drive, the problem is they don’t suit everyone. I.e. I’m considering this cable:
http://www.digikey.fi/product-search/en?WT.z_header=search_go&lang=en&site=fi&keywords=M3CCA-2618R-ND&x=0&y=0
It may be too short for some users and it would be then wasted 3 euros per drive if included in every package.

By: Weerasak

Weerasak — Tue, 18 Jun 2013 16:44:27 +0000

I like the way you design things, mostly you use off-the-shelf parts, simple as DIY style. In previous version, I have many motors ready to experiment because I have many soldered D-Sub connector with the motor’s cable end.

In Argon version, you still using those common connectors, so I can get them locally, even cheaper than Farnell.

In my case, please don’t put them in the box, so you can pack Argon nice and easy without worry about scratch and dent on its body.

Again, it is only my case, but other fellows might have a difficulty to get those parts in their area. So put them as an option will be suit for both parties.

By: PowerQuestion

PowerQuestion — Tue, 18 Jun 2013 11:40:45 +0000

It should be always present in my opinion in the drive package and still on the web page. Why: when you buy the drive, probably you will not check that you need the connector A, B and C and so on. You wait 1 week to the drive to arrive and then…. ohh you still need the connector that will also take 1 week and cost more in transport than if already present on the first package.
OR when ordering the drive, it should be clearly stated what are the needed parts not included on the package.

By: Johann

Johann — Tue, 18 Jun 2013 11:31:02 +0000

Can you leave the choice to buy drivers with or without connectors in the shop page?
Everyone can select according to their needs